Purchasing a home is the single largest investment for anyone. But, the roof of your house can undergo serious damage, weathering, disintegration, or malfunctioning at any point throughout its lifetime. So, it is very important to take care of it. Regular maintenance program will help to keep your roof safe for many years. Below information will help you know about the roof inspections.

Keeping the roof clean is very important. Leaves, branches of the trees needs to be removed regularly. These and other debris material are capable enough to hold moisture, thus giving a favorable condition for the growth of mold and mildew. This causes troubles in easy flow of water and can also clog the gutters. Build up of debris on the roof can put pressure on the roof thus can damage it. You can use a plastic leaf leaf rake or an air blower to clean it.

Some amount of sunlight should also reach the roof. So if there are so many trees in front of your roof, trim that in such a way that sunlight make it’s way to your roof. This will reduce the moisture and mildew problem and will prevent the debris from collecting over the roof.

Gutters are an important part of roofs. So, it is very important that they should be working fine. If they are clogged with leaves and debris, clean it immediately and make sure they are draining properly.

Always wear gloves for protection while cleaning the roof. Debris may include sharp and pointed particles which can harm you. Collect all the debris into a bucket and then flush the gutter with a hose. Do carry a hammer with you to fix any loose nails and fix the gutter back to it place.

Flashing is used at connections between roof sections, around chimneys, vents, skylights”anywhere the plane of your roof is interrupted. They can be manufactured from steel, aluminum, copper or vinyl. Look for loose flashing or flashing with holes in it. Also, check out for any damaged or missing shingles and get them repaired without any delays.

If you come across a loose flashing, use galvanized screws to tighten them. These are much better in quality and will stay for long. To add more strength, cover the screw head with roofing cement. Do not use galvanized screws for copper flashing, it may corrode it.

On sloped roofs, removing debris from roofs and eaves and cleaning the gutters once or twice a year will solve most drainage problems. Remember also to check the downspouts and drains for damage, leaks or clogging. For flat roofs, you need a drainage system that handles water, and it should be in working order at all times. Check to make sure water is not ponding anywhere.