There are quite a number of companies today who don’t just supply home wind generators, but also install them for you, however these can be quite expensive. If you are thinking about installing this renewable energy source in your home and your budget is tight, you may want to think about building a wind generator yourself.

You may not realize it, but building a wind generator yourself could end up only costing you around $100 - $200, rather than thousands and will be a very wise investment indeed. This one small investment in turn could end up saving you thousands of dollars on what you electricity bills would normally be.

Another thing you may not realize when it comes to building a wind generator is that many of the parts required can be purchased at your local hardware or DIY store or online. So thinking that you are going to have problems obtaining the parts that will prevent you from building it is simply not going to happen.

Now before you consider building a wind generator for your home, there are a number of factors that will need to be taken into consideration beforehand. In this article we look at just what some of these factors are. If you keep these in mind before, during, and after you have constructed your system then you can be confident in knowing that it will last for many years to come.

Tip 1: The Base - It is important that you provide the wind generator with ample support and this means constructing a sturdy base on which it canstand. Ideally, the base should be made from concrete which will allow you to ensure that the supports of your wind generator are held firmly in place no matter how strong the wind blows.

Tip 2: The Tower - The tower itself is best made from metal, however you can construct it from plywood, but you need to ensure that you use the thickest plywood possible. This will ensure that the tower is sturdy andcan cope with the effects of wind blowing against it.

Tip 3: The Wind Blades - Make sure that the blades you make or use can move without any hindrance or friction. This in one of the most important parts of your system. In fact, you are far better off purchasing premade quality blades as this will ensure that they create enough energy for your particular needs.

If however you intend to make your own do so using PVC or plywood. Also, you must make sure that the size of the blades is in equal proportion to the size of the tower you have built or purchased. If the blades are too large the tower won’t be able to hold them, too small and they won’t create enough energy. It’s crucial that you get this part right.

Tip 4: The Gearbox - When you are thinking of building a wind generator you need to pay close attention to what the gearbox is to be constructed from. If you use inferior quality materials or equipment this can result in the blades being unable to turn as freely as they should and so the amount of energy they produce is reduced. If you decide to buy a gearbox instead of building one, make sure you purchase a complete working gearbox that is specifically designed for installation into wind generator system.